Proper glove use is just as important as choosing the right type—ill-fitting or incorrectly worn gloves can reduce protection by up to 50%. At Qingdao Meiji Labor Products Co., Ltd, we engineer gloves for optimal safety, but their effectiveness depends on correct wear and maintenance.

This guide covers the right way to wear, adjust, and inspect safety gloves to maximize protection.

1. The 5-Step Glove Donning Checklist

✅ Step 1: Choose the Right Size

* Too tight → Restricts blood flow, causes fatigue

* Too loose → Increases snag risks, reduces grip

* Qingdao Meiji’s sizing guide: Measure hand circumference (knuckles) and length (wrist to fingertip).

✅ Step 2: Inspect Before Wearing

Check for:

✔ Holes/tears (stretch the material lightly)

✔ Degraded spots (especially chemical gloves)

✔ Loose seams (critical for cut-resistant models)

✅ Step 3: Roll, Don’t Pull

* For disposable gloves: Roll the cuff outward, then slide fingers in gently.

* For reusable gloves: Fold the cuff back, insert hand, then unfold for a snug fit.

Avoid "snapping" gloves on—this weakens the material.

✅ Step 4: Secure the Wrist

* Short cuffs: Tuck under sleeves to prevent debris entry.

* Gauntlet cuffs: Overlap with protective sleeves by at least 1 inch.

✅ Step 5: Perform a Dexterity Test

* Make a fist → No excessive tightness

* Pick up a small object (e.g., screw) → Precision maintained

* Rotate wrist → No material bunching

2. Common Mistakes That Reduce Protection

❌ Wearing rings/watch under gloves → Causes tears and pressure points

❌ Reusing disposable gloves → Cross-contamination risk

❌ Ignoring inner liners in cold weather → Reduced thermal protection

❌ Pulling gloves off by the fingers → Weakens seams

3. Industry-Specific Tips

✅ Construction (Leather/Cut-Resistant Gloves)

* Pre-wet gloves in summer to improve grip before heavy lifting.

* Brush off debris daily to prevent abrasive wear.

✅ Chemical Handling (Nitrile/Neoprene Gloves)

* Wash hands first to avoid sweating inside gloves.

* Double-glove for high-risk splashes (change outer layer immediately if breached).

✅ Healthcare/Food Service (Disposable Gloves)

* Sanitize hands before wearing to prevent bacterial growth inside.

* Change every 2 hours or after torn.

4. When to Replace Gloves

Even premium gloves wear out. Watch for:

⚠ Discoloration/stiffness (chemical degradation)

⚠ Pilling/fraying (cut-resistant fibers failing)

⚠ Loss of grip texture (oil/sweat buildup)

5. Why Proper Fit Matters

Studies show:

* 60% of workers wear incorrectly sized gloves (NIOSH)

* Well-fitted gloves increase compliance by 3×

Our solution:

* 12-size precision system (XXS–XXL)

* Left/right-handed designs for critical tasks

Conclusion: Small Steps, Big Protection

A glove only works if worn right. Qingdao Meiji Labor Products Co., Ltd combines:

Remember: The difference between "gloves on" and gloves working is in the details.

Need Custom Sizing?

Contact our PPE specialists:

0086-15020088730 | info@meijigloves.com | www.meijigloves.com